Leo Machines Catalog

LEO Machinery 2009 - 2 - 07-2009 THE UVS-2000: In addition, and independently from each other, left and right spirals can be produced. Due to the fully automatic method, it is ensured that the spirals produced are equal throughout for further processing into dry or wet felt for the papermaking industry, filtration industry as well as conveyor belts for all kinds. Full automation means that one person can operate and supervise 10 to 12 winding machines. METHOD: From the 10kgs reels (DIN 335) or 20kgs reels (DIN 355) which are unwound when standing on the floor and by using the supplied unwinding device, the monofilament is led over the rotating unwinder to the monofilament removal motor. Then the monofilament may either be led over the adjusted preheater or directly to the spring pressure brake, the electronic filament tensioning with display, the monofilament oiler (per requirement) and the micro-limit switch to the winding head with a fixed mandrel. This permits a speed of up to 2000 rpm, according to the monofil diameter. Through the rotating motion the monofilament is formed into a spiral and led to the guide channel arranged as moving part. Here, the spiral runs through a heating zone (contact heat). In the cooling section that follows, the adjusted removal motor can be set to regulate the pitch of the spirals. (Important for spiral joining.)The spiral runs then over a gliding device into the storage container ready for onward processing.To adapt the machine to a different spiral size, only a set of mandrels is needed. All other adjustments are made directly on the machine! TECHNICAL DATA: Electrical connection: 220 V - 16 Amp - 50/60 Hz (2.9 kW) 110 V - 16 Amp - 50/50 Hz (2.9 KW) Motor, main actuation: brushless DC motor 2 x 1.0 hp regulation from 0-1600 or 0-2000 rpm with DC speed indicator Motor, monofilament take-off: brushless AC motor, controlled by frequency converter Motor, spiral pitch: brushless AC motor, controlled by frequency converter Regulator/heating, channel: 4x digital thermo-regulator with relay (2 zones) 4x contact heaters, each 220 watts (2 zones) Regulator/heating, preheating: 2x digital thermo-regulator with relay 2x contact heating, each 300 watts Electronic monofi tension display: 2x digital, 0 to 100% Air connection: 6 bar Capacity: Fine mesh at 2000 rpm 336 m/1h = 2.650 m/8h = 8.000 m/24h Medium mesh at 1600 rpm 306 m/1h = 2.400 m/8h = 7.300 m/24h Coarse mesh at 1200 rpm 288 m/1h = 2.300 m/8h = 6900 m/24h Monofilament types: ONLY ROUND monofilaments from 0.50 to 1.00 mm diam. of Polyester, PPS, PEEK or Polyamid made by Nextrusion, Bedea or other well know suppliers. Weight/space requirements: approx. 450kgs - 2.50 x 1.50 meters