Leo Machines Catalog

LEO Machinery 2009 - 2 - 07-2009 METHOD: 30 left and 30 right spirals are threaded into the machine by a joining block after running over a conveying system.At the other side of the machine, 59 wire connectors are threaded with the help of a conveying device and pass through the preheater right up to the cutting plate. EQUIPMENT OPERATION: With the closure of the plastic lid beginns the joining process of the 60 separate spirals. Two rolls convey the joined spiral mesh to the table where a conveyor leads it to a channel. Upon reaching the preset length, the joining operation is stopped and a cutter cuts the spiral automatically. Then, the joined and cut spiral mesh is conveyed in the channel by rapid motion up to the wire connector section where it is slowed down when reaching the light barriers. The spiral mesh is seized and aligned in order to correctly insert the 59 wire connectors. Upon reaching the preset length, conveying is stopped and the wire connectors are automatically cut. Now, the finished spiral mesh is conveyed a little backwards in the channel, the lid opens and the operator can take the spiral mesh out to join it to the spiral fabric. The joining of the joined spiral strip to the spiral fabric is to be made manually, but during this time, the next cycle can run. When the spiral mesh has been joined to the spiral mesh, the individual wire connector can be pushed through the opening by a motor. This machine can be operated by one person because a cycle runs about as long as it takes to join the spiral to the spiral fabric. TECHNICAL DATA: Electrical connection: 380 V - 35 Amp - 50/60 Hz (cps) AC (6.0 kW) 220 V - 35 Amp - 50/60 Hz (cps) AC (6.0 kW) Motors: AC geared motor, unlimited regulation by frequency converter (quantity as per required table length) Heating/presetting of length: 1x digital thermo-regulator with relay (preheating of wire connector) digital preset of spiral and wire connector lengths Control: Siemens S7 PLC control with 10" Touch Panel Automatic cycle program / Manual Operation Air connection: 10 bar Lengths of joining table: 6 meters, 9 meters or 12 meters with conveyor belt (tables divided into sections of 3 meters) Monofilament: creel for 60 monofilament reels DIN 250 (5kgs) or DIN 335 (8kgs) designed for wire connectors of 0.70 to 0.90 mm diam. Spirals: transport cart for 60 spiral containers (up to 5 kgs capacity) Spiral size: Micro (4.50 x 2.50 mm) Monofilament 0.35 x 0.70 mm Fine (5.40 x 3.40 mm) Monofilament 0.60 mm and 0.43 x 0.70 mm Medium (6.80 x 3.80 mm) Monofilament 0.70 mm and 0.57 x 0.88 mm Coarse (8.50 x 4.50 mm) Monofilament 0.90 mm and 0.80 x 1.20 mm Capacity: approx. 25 to 30 sqm per hour, with spirals of good quality!! Machine length: 3 Meter, 6 Meter, 9 Meter, 12 Meter Weight/space requirements: for 6 Meter Tisch approx. 380kgs 1300 x 150 cm for 9 Meter Tisch approx. 495kgs 1600 x 150 cm for 12 Meter Tisch approx. 620kgs 1900 x 150 cm